Online Safety Community

Top Ten Things to Watch for at Home # 10

10. Your dryer exhaust

You clean the lint trap every time you put a load in the dryer to make sure that your dryer isn't working too hard and wasting energy. That's good! When was the last time that you cleaned the lint in the exhaust hose?

According the the US Consumer Product Safety Commission website "in 1998, clothes dryers were associated with 15,600 fires, which resulted in 20 deaths and 370 injuries." Fires start when lint accumulates in the exhaust and in the hose, gets overheated and ignites.

The Fix

These tips on how to prevent clothes dryer fires come from the Consumer Product Safety Commission:

  • Clean the lint screen/filter before or after drying each load of clothes. If clothing is still damp at the end of a typical drying cycle or drying requires longer times than normal, this may be a sign that the lint screen or the exhaust duct is blocked.
  • Clean the dryer vent and exhaust duct periodically. Check the outside dryer vent while the dryer is operating to make sure exhaust air is escaping. If it is not, the vent or the exhaust duct may be blocked. To remove a blockage in the exhaust path, it may be necessary to disconnect the exhaust duct from the dryer. Remember to reconnect the ducting to the dryer and outside vent before using the dryer again.
  • Clean behind the dryer, where lint can build up. Have a qualified service person clean the interior of the dryer chassis periodically to minimize the amount of lint accumulation. Keep the area around the dryer clean and free of clutter.
  • Replace plastic or foil, accordion-type ducting material with rigid or corrugated semi-rigid metal duct. Most manufacturers specify the use of a rigid or corrugated semi-rigid metal duct, which provides maximum airflow. The flexible plastic or foil type duct can more easily trap lint and is more susceptible to kinks or crushing, which can greatly reduce the airflow.
  • Take special care when drying clothes that have been soiled with volatile chemicals such as gasoline, cooking oils, cleaning agents, or finishing oils and stains. If possible, wash the clothing more than once to minimize the amount of volatile chemicals on the clothes and, preferably, hang the clothes to dry. If using a dryer, use the lowest heat setting and a drying cycle that has a cool-down period at the end of the cycle. To prevent clothes from igniting after drying, do not leave the dried clothes in the dryer or piled in a laundry basket.

Views: 4

Tags: Dryer, Home, Safety, fire, lint, prevention

Comment

You need to be a member of Online Safety Community to add comments!

Join Online Safety Community

Take our poll!

Take our poll!

Latest Activity

Ken Oswald posted a blog post

ICE your Phone - In Case of Emergency

ICE - In Case of EmergencyProgramming of Emergency Contact Numbers in your PLATEAU Cell PhonesICE – In Case of Emergency - programming of your cell phones with ICE is a concept that was developed by a paramedic in England. It was realized that most of his victims did not carry emergency contact information but did carry cell phones. So the campaign started was to get people who carry cell phones to put in a listing of ICE in their cell phone directory with a number that should be called In Case…See More
yesterday
Jack Lingner posted a photo

WRS8D

Webb-Rite Safety has engineered, completed testing and began production of the WRS8D 8 foot web 100% dual-leg SRL available with any configuration of hooks needed. The total weight with standards hooks is only 4.5 lbs making it the lightest dual-leg…
yesterday
Foroogh Doshman Fanan is now a member of Online Safety Community
yesterday
Larry Riley posted a status
"Also we continue to provide Forklift and Aerial Lift Certified Training courses for companies needing there employees to be certified ."
yesterday

Forum

About Me

Sarah Chamberland has completed a Diploma in Manufacturing and testing. His responsibilities include production and safety inspection of construction equipment and also repair services for equipment.…Continue

Started by Sarah Chamberland May 1.

Industrial head protection standard (Z89.1) to be revised; consensus viewers needed

The voluntary consensus standard, ANSI/ISEA Z89.1-2009, American National Standard for Industrial Head Protective is scheduled to be revised this year.  The standard, recognized by OSHA, includes the…Continue

Tags: OSHA, ISEA, Z89.1, hats, protection

Started by Cristine Fargo Apr 25.

Be a Safety Leader: Join Our Wolf Pack 1 Reply

We are looking for partners to make a commitment to safety by joining our Wolf Pack. By joining the pack, you are committing to the safety and well being of first responders and your own…Continue

Started by John Petropoulos Memorial Fund. Last reply by Ellen Zoneth Apr 24.

Road Safety Solutions 1 Reply

The Road Safety Signs ,Barriers,Humps,Hazard Markers and Visual Warnings are some of the important marks to be observed. Signs such as "keep left",stop, "give way" should not be casually treated.…Continue

Tags: safety, gear, wear, Equipment, &

Started by Enna Henry. Last reply by Ellen Zoneth Apr 24.

What's your favorite motivational/safety quote? 53 Replies

Favorite Motivational Quote: If you want something, you'll find a way - If not, you'll find an excuse.Favorite Safety Quote: Don't learn safety by accident!Continue

Started by Michelle Sears. Last reply by LULA MULLINS Apr 23.

Badge

Loading…

© 2013   Created by Safety Community.   Powered by

Badges  |  Report an Issue  |  Terms of Service