Online Safety Community

Greetings all

Here are a few general holiday safety tips to make your holiday season more safe and enjoyable. Additionally, I have attached the Winter Safety Guide with tips for Winter driving, Holiday Safety, Frostbite and more to utilize this winter for home, travel or work that you may be able to fully enjoy this holiday season safely.

Trees:

  • When purchasing an artificial tree, look for the label "Fire Resistant."
  • Although this label does not mean the tree won't catch fire, it does indicate the tree will resist burning and should extinguish quickly.
  • When purchasing a live tree, check for freshness. A fresh tree is green, needles are hard to pull from branches and when bent between your fingers, needles do not break. The trunk butt of a fresh tree is sticky with resin, and when tapped on the ground, the tree should not lose many needles.
  • When setting up a tree at home, place it away from fireplaces and radiators.
  • Heated rooms dry live trees out rapidly, be sure to keep the stand filled with water.
  • Place the tree out of the way of traffic and do not block doorways.

Lights:

  • Indoors or outside, use only lights that have been tested for safety by a recognized testing laboratory, which indicates conformance with safety standards.
  • Check each set of lights, new or old, for broken or cracked sockets, frayed or bare wires, or loose connections, and throw out damaged sets.
  • Use no more than three standard-size sets of lights per single extension cord.
  • Never use electric lights on a metallic tree. The tree can become charged with electricity from faulty lights, and a person touching a branch could be shocked.
  • Before using lights outdoors, check labels to be sure they have been certified for outdoor use.
  • Fasten outdoor lights securely to trees, house walls, or other firm supports to protect the lights from wind damage.
  • Use only insulated staples to hold strings in place, not nails or tacks. Or, run strings of lights through hooks (available at hardware stores).
  • Turn off all lights when you go to bed or leave the house. The lights could short out and start a fire.
  • For added electric shock protection, plug outdoor electric lights and decorations into circuits protected by ground fault circuit interrupters (GFCIs). Portable outdoor GFCIs can be purchased where electrical supplies are sold. GFCIs can be installed permanently to household circuits by a qualified electrician.

Decorations:

  • Use only non-combustible or flame-resistant materials to trim a tree. Choose tinsel or artificial icicles of plastic or nonleaded metals. Leaded materials are hazardous if ingested by children.
  • Never use lighted candles on a tree or near other evergreens.
  • Always use non-flammable candle holders
  • Place candles where they will not be knocked down.
  • In homes with small children, take special care to avoid decorations that are sharp or breakable
  • Keep trimmings with small removable parts out of the reach of children to avoid the child swallowing or inhaling small pieces
  • Avoid trimmings that resemble candy or food that may tempt a child to eat them.
  • Wear gloves to avoid eye and skin irritation while decorating with spun glass "angel hair."
  • Follow container directions carefully to avoid lung irritation while decorating with artificial snow sprays.

Fireplaces:

  • Use care with "fire salts," which produce colored flames when thrown on wood fires. They contain heavy metals that can cause intense gastrointestinal irritation and vomiting if eaten. Keep them away from children.
  • Do not burn wrapping papers in the fireplace. A flash fire may result as wrappings ignite suddenly and burn intensely.

Information provided by the National Safety Council

Today’s blog post is brought to us courtesy of Ken Oswald
Safety and Security Manager for Plateau
koswald@plateautel.com

Views: 73

Tags: Fireplaces, Holiday, Safety, Tips, lights, trees

Comment

You need to be a member of Online Safety Community to add comments!

Join Online Safety Community

Take our poll!

Take our poll!

Latest Activity

Profile IconMOHAMED KHALIFA ALBAHI, Evelyn Ferrer and Brett Lamont joined Online Safety Community
12 hours ago
Wayne Harris posted a discussion

My Personal Safety Quotes that I use in conferences and management training programs

Over the years I have come up with several of my own safety and leadership quotations that I have used in either in conferences, meetings or training sessions.  Sometimes you can say just a few words and the message sticks with people for the rest of their lives.   I have put below a few of my favourites that I have had success with when trying to make people accept their responsibilities and actual become actual leaders. …See More
19 hours ago
Wayne Harris posted a blog post

My Personal Safety Quotes:

 Over the years I have come up with several of my own safety and leadership quotations that I have used in either in conferences, meetings or training sessions.  Sometimes you can say just a few words and the message sticks with people for the rest of their lives.   I have put below a few of my favourites that I have…See More
19 hours ago
John Robinson posted events
21 hours ago

Forum

My Personal Safety Quotes that I use in conferences and management training programs

Over the years I have come up with several of my own safety and leadership quotations that I have used in either in conferences, meetings or training sessions.  Sometimes you can say just a few words…Continue

Tags: training, conference, Leadership, Quotes, Safety

Started by Wayne Harris 19 hours ago.

What's your favorite motivational/safety quote? 54 Replies

Favorite Motivational Quote: If you want something, you'll find a way - If not, you'll find an excuse.Favorite Safety Quote: Don't learn safety by accident!Continue

Started by Michelle Sears. Last reply by Ellen Zoneth 20 hours ago.

About Me 1 Reply

Sarah Chamberland has completed a Diploma in Manufacturing and testing. His responsibilities include production and safety inspection of construction equipment and also repair services for equipment.…Continue

Started by Sarah Chamberland. Last reply by Ellen Zoneth 20 hours ago.

Industrial head protection standard (Z89.1) to be revised; consensus viewers needed 1 Reply

The voluntary consensus standard, ANSI/ISEA Z89.1-2009, American National Standard for Industrial Head Protective is scheduled to be revised this year.  The standard, recognized by OSHA, includes the…Continue

Tags: OSHA, ISEA, Z89.1, hats, protection

Started by Cristine Fargo. Last reply by Ellen Zoneth yesterday.

Safety - A Prerequisite 1 Reply

Whether working at home or outside, to observe safety should be our pre-requisite. The employer before anything must be sure of the safety of its employees especially the ones working in mines or any…Continue

Tags: products, safety

Started by Enna Henry. Last reply by Ellen Zoneth yesterday.

Badge

Loading…

© 2013   Created by Safety Community.   Powered by

Badges  |  Report an Issue  |  Terms of Service